AMW MiniPro-50 Professional Portable Balance 50 x 0.001 Gram

$199.99

American Weigh LogoAmerican Weigh Scales, Inc.

American Weigh MiniPro-50 Professional Portable Balance 30x0.001 Silver


Features:

  • 50g x 0.001g (miniPro-50)
  • Flip down cover protects delicate weighing surface.
  • Large Back-lit LCD
  • Programmable Auto-off and Backlight
  • Includes AC Adapter, or use four AAA batteries for maximum portability
  • Comes with calibration weight and weighing tray.
  • Reads in ct, g, oz, ozt, dwt, and gn
  • Hard Plastic Case Included
American Weigh MiniPro-50 Professional Portable Balance 50 x 0.001 case
American Weigh MiniPro-50 Professional Portable Balance 50x0.001 tray
American Weigh MiniPro-50 Professional Portable Balance 50x0.001 AC adapter
American Weigh MiniPro-50 Professional Portable Balance 50 x 0.001 weight

Model
miniPro-50
Capacity
250.00ct
50g
1.7637oz
1.6075ozt
32.15dwt
771.62gn

Readability

0.05ct
0.001g

0.0001oz
0.0001ozt
0.001dwt
0.05gn

Scale Dimensions
5.2" x 3.7" x 2.3"
Platform Dimensions
O 2.7 inch
Power
4 x AAA Batteries (not included) or
AC Power Adapter (included)

American Weigh

miniPRO-50 Users Manual

Thank you for purchasing the miniPRO Portable Precision Balance. With normal care and proper treatment, it will provide you with years of reliable service. Please read all operating instructions carefully before using the scale. Avoid any exposure to extreme heat or cold. Your scale will work better when operating in normal room temperature. Always allow the scale to acclimate to normal room temperature for at least an hour before use.Give the scale sufficient warm up time before use. Usually 30 to 60 seconds to give the internal components time to stablize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents, or a close proximity to other electronic equipment can cause an adverse effect on the reliability and accuracy of your scale.Handle with care. Gently apply all items to be weighed onto the weighing surface. Although this scale is designed to be quite durable, avoid rough treatment as this may permanently damage the internal sensor.Do not shake, drop, or otherwise shock the scale. This is a precision instrument and must be handled with extreme care.Only operate the scale on a stable, vibration free surface.Always store in a dry place to avoid moisture accumulation on internal components.

I. Operation

This scale operates using either 4 AAA batteries or an included AC Adapter. Insure the scale is plugged into a wall outlet, or has battery power before use.

To operate, set the balance on a flat / stable surface away from interference from wind, vibration, and radio waves. If needed, you may adjust the scales feet to insure that the scale is level. Press the "On/Off" key to begin weighing. Once the scale reads "0.000", you may place the item to be weighed onto the center of the platform.

This scale has a backlight with adjustable settings. To change the backlights parameters, press the "Fn" key two times. The scale will display F1, meaning the backlight will come on when weight is on the scale. Press the "Tare" key to confirm your selection. Backlight will come on when weight is on the scale. Backlight is always on. Backlight is always off. Off setting (OFF, 60, 120, 180, 240, 300, 360, 420, 480, or 540) selection.

To cycle through the different modes, press the "Unit" key. ct, g, oz, ozt, dwt, and gn 

II. Auto-Off Feature

This scale has an Auto-Off feature that can help battery life by turning the scale off when not in use for a certain amount of time (1-9 minutes). To change the Auto-Off timer, press the "Fn" button three times. The scale will show the current Auto-

Press the "Unit" button to cycle through until you find the desired timer duration (in seconds). Press "Tare" to confirm your

III. Calibration

If the scale is not performing properly or is displaying incorrect weight, you may need to recalibrate the scale. Typically, the Standard Calibration method is sufficient for the average user to recalibrate their scale. Advanced calibration is already performed at the factory and should not be attempted unless you are still having problems. Before starting calibration, insure that the area you are working in is free of drafts, vibration, and all radio-wave emitting devices (cordless phones etc).

Standard Calibration:

You will need a 10 gram weight to perform calibration. Press the "Fn" button one time, "SCALE" will be displayed on the LCD; Press the "Tare" button to continue. The scale will display 10.000 . Press "Tare" once more. When the scale will flash "10.000" on the display, place your 10g calibration weight onto the weighing surface. In a few seconds, the display will stop flashing, and return to normal weighing. Calibration is complete!

Advanced Calibration:

You will need both a 10 gram and a 20 gram weight to perform calibration (or three 10 gram weights). Press the "Fn" button one time, "SCALE" will be displayed on the LCD; Press the "Units" button once to change to "LINE" mode, then press "Tare" to confirm. The scale will display 10.000, press "Tare" again to confirm. The display will flash "10.000". At this time, place a 10 gram weight on the center of the weighing platform. In a few seconds, the display will change to "30.000". At this time, either add a 20g , or two more 10g weights (there should be 30g on the scale at this point). The display will now show "30.000" and return to normal weighing. Calibration is complete!

IV. Weighing Units

This scale can weigh in either grams, ounces, troy ounces, pennyweights, grains, or carats. To change the active weighing unit, press the "Units" key. The scale also remembers the last unit used. Therefore, the next time the scale is turned on, it will revert to the previously used weighing unit. You may change weighing units in the middle of weighing as well.

V. Tare Feature

Tare allows you to subtract the weight of a container (ie. the included weighing tray) in order to obtain the weight of objects in the container (net weight). To use the scales "Tare" button, turn the scale on in normal weighing mode and wait for the screen to show "0.000". Place the container you wish to use on the scale then press the "Tare" button. The weight of the container is now subtracted and the scale should read 0.000 again. If you now remove the container, a negative value will be shown. If you wish to clear the negative value, press "Tare" again.


Add to Cart:

  • Model: MINIPRO-50
  • Shipping Weight: 3lbs
  • 18 Units in Stock
  • Manufactured by: American Weigh Scales

This product was added to our catalog on Saturday 28 June, 2008.

Copyright © 2017 GoldTestSolutions.com. Powered by Zen Cart